Introduction

  1. mBDZrI5xEIsuEKAI
    mBDZrI5xEIsuEKAI
    oLCCoWKF2y1yDElT
    • Use the flat end of a spudger to lift up and disconnect the battery press connector from the motherboard.

  2. pcUMQSnKMfaSLRCE
    pcUMQSnKMfaSLRCE
    Dpu5W5L5SGRhXSaX
    • The connector labeled "OCTA" is not connected to the board but rather the display cable connector. Make sure you disconnect the connectors from each other.

    • Insert the flat end of a spudger under the overhang of the top "OCTA" cable connector.

    • Pry up the top connector away from the bottom one until they're disconnected.

  3. EqR5Of4qeDAXvIqr
    EqR5Of4qeDAXvIqr
    VjlrcZx2iJyaWha6
    • Use the flat end of a spudger to pry up the "SUB" connector from the daughterboard and disconnect it.

  4. D6VWJGX3wNdFVixS
    D6VWJGX3wNdFVixS
    nXyHSbt5YKuPkCF5
    • Use the flat end of a spudger to pry up the "MAIN" connector from the motherboard and disconnect it.

  5. uMSFcEOk4MbMtTHr
    uMSFcEOk4MbMtTHr
    ZZTUQjceqd5aoScC
    • Pick up the interconnect cable and remove it from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nick Schultz

Member since: 24/03/24

13497 Reputation

0 comments