Portable Power Station Tool Mounts Removal (Internals Removed)

Written By: Nick Schultz
  • Comments: 0
Portable Power Station Tool Mounts Removal (Internals Removed)

Difficulty

Easy

Steps

2

Time Required

No estimate

Introduction

Tool mounts removal for the Portable Power Station disassembly guide.

  1. ANNrEQn3bRXaeK5T
    ANNrEQn3bRXaeK5T
    N1pY3vj42LknTKrk

    • Use a Phillips screwdriver to remove the two 6 mm‑long screws securing the tool mounts on either side of the power station.

  2. tJS4kOPbNbkwutyW
    tJS4kOPbNbkwutyW
    eQdJBNnNs1OIugPE

    • Use your fingers to pull the tool mounts off both sides of the power station.

    • The tool mounts are keyed. During reassembly, align the pins on the mounts with the holes in the enclosure.

Author

Nick Schultz

Member since: 24/03/24

13497 Reputation

0 comments