How to Use the Smart Soldering Iron Cap As a Stand

Written By: Kara Piepenbrink
  • Comments: 0
How to Use the Smart Soldering Iron Cap As a Stand

Difficulty

Very easy

Steps

4

Time Required

1 minute

Introduction

Use this guide to mount the FixHub Smart Soldering Iron cap onto a Portable Power Station to use it as a stand.

  1. weGId3ewqaaKp3Cx
    weGId3ewqaaKp3Cx
    BRiJ1U4PQMbU52JP

    • Never hold the soldering iron past the grip. Touching the metal soldering tip while the Touch-Safe Indicator LED is orange or purple can cause severe burns. Always assume the tip is hot.

    • Never leave the soldering iron unattended while the power switch is in the orange ON position.

    • To be safe, keep the cap on your iron when not in use. The inside of the cap is heat-resistant and can be used to cover your iron, even when hot.

  2. GvWFlkbZqM1w4k5A
    GvWFlkbZqM1w4k5A
    AuSlQvWQqQUJ1pwe

    • Hold the iron from both ends and pull to remove the cap.

  3. KOTcMNiBm65uD4cS
    KOTcMNiBm65uD4cS
    WDTfWoUQYLGMGbZC
    mwXAdk2OitUQOMLn

    • Align the widest opening of the cap's spring clip with the circular, blue tool mount on either side of the Portable Power Station.

    • Place the spring clip over the mount and slide the cap down to secure it in place.

    • Alternatively, you can leave the cap on the iron while you clip it in place.

  4. S4lu5NLMAvFxMD4D
    S4lu5NLMAvFxMD4D
    iuUmSabSkMbMQLUB

    • Remember: Never leave the soldering iron unattended while the power switch is in the orange ON position.

    • Place your iron in its cap.

    • While powered on, the iron will enter Idle Mode after remaining stationary for 30 seconds. It'll reheat to the set temperature immediately upon movement.

Conclusion

Click here for more soldering skills, or ask our Answers community for help.

Author

Kara Piepenbrink

Member since: 31/05/24

3535 Reputation

0 comments