Hotpoint NSWR 963C WK - Accessing Water Level Sensor
Tools
These are some common tools used to work on this device. You might not need every tool for every procedure.
Common Errors:
List of Error Code is published here
F01 - Electronic circuit board fault
F02 - Motor circuit fault
F03 - Temperature sensing fault
F05 - Can't drain
F06 - Door Lock
If you've just drained washing through the door because of a blockage then it's probably the door interlock has got wet!
F07 - Electronic circuit board fault / heating circuit fault
F08 - Heater fault
F09 - Software fault
F11 - Pump circuit fault
F12 - Electronic control fault
F13 - Dryer temperature sensing fault (washer dryers only)
F15 - Heater control fault (Washing Machine and Washer Dryers)
F16 - Drum lock position sensor fault (top loading machines only)
F18 - Internal data error
Internal Photos:
Water Extraction Pump:
Cold Water Inlet:
Mains Electrical Cable Entry:
View of Back of left side of front panel (motor in forground):
