General
The first-generation Elli Chargers, introduced by Volkswagen Group's subsidiary, Volkswagen Group Charging GmbH, marked a significant step in Volkswagen's push towards electric mobility. "Elli," short for "Electric Life," became Volkswagen's platform for delivering EV charging solutions. The first-generation Elli Chargers were designed to provide convenient home charging for electric vehicles, supporting the company’s commitment to expanding consumer charging infrastructure.
The first-generation Elli Charger Lineup is manufactured by EVBox Manufacturing B.V., an electric vehicle supply equipment company based in the Netherlands.
Technical Specification
Electrical Properties
| 1 Phase | 3 Phase | |
|---|---|---|
| Rated Voltage (± 10 %) | 1x 230 V | 400 V (3x 230 V) |
| Rated Frequency | 50 Hz | |
| Rated Current | 1x 32 A | 3x 16 A |
| Max. Charging Capacity (depending on individual configuration) | 7,4 kW | 11 kW |
| Charging Plug | AC – Type 2 | |
| Charging Cable Length | 4,5 m or 7,5 m | |
| Installation Wiring Cross Section | 1 – 10 mm2 | 1 – 6 mm2 |
| Internal Earth Leakage Sensor | IΔn DC ≥ 6 mA (IEC 61851) | |
| Additionally needed Upstream Protection | - Residual Current Detection minimum Type A (30 mA AC) - Circuit Breaker 32 A (1 Phase) or 16 A (3 Phase) | |
Physical Properties
| Dimensions [W x H x D] (in mm) | 297 x 406 x 116 |
| Status Indication | LED based HMI |
|---|---|
| Enclosure Ratings | IK 10 (IEC 62262) IP 54 (IEC 60529) |
| Weight (depending on variant and charging cable length) | 5,6 kg … 7 kg |
| Operating Temperature | -30 °C … +50 °C |
| Max. Humidity | 95 % (non-condensing) |
| Max. Altitude | 4000 m a.m.s.l. |
| Mounting Method | On Wall |
| Dynamic Load Management | via AC Current Sensors (optional additional material needed) |