General
The Elli Charger Standard serves as the base model within the first-generation Elli Charger lineup. It provides a convenient home charging solution for electric vehicles, delivering up to 11 kW of charging power. Equipped with an integrated charging cable, it's compatible with Type 2 connector-equipped EVs. This straightforward option offers a user-friendly way to charge your electric vehicle at home, devoid of the advanced smart features found in the higher-tier Elli Charger models.
Technical Specification
Product Configuration
| Charging Mode | Mode 3 (IEC 61851) |
|---|---|
| Access Control | - |
| Internet- / Network Communication | - |
| Communication Protocols | - |
| Metering | - |
Electrical Properties
| 1 Phase | 3 Phase | |
|---|---|---|
| Rated Voltage (± 10 %) | 1x 230 V | 400 V (3x 230 V) |
| Rated Frequency | 50 Hz | |
| Rated Current | 1x 32 A | 3x 16 A |
| Max. Charging Capacity (depending on individual configuration) | 7,4 kW | 11 kW |
| Charging Plug | AC – Type 2 | |
| Charging Cable Length | 4,5 m or 7,5 m | |
| Installation Wiring Cross Section | 1 – 10 mm2 | 1 – 6 mm2 |
| Internal Earth Leakage Sensor | IΔn DC ≥ 6 mA (IEC 61851) | |
| Additionally needed Upstream Protection | - Residual Current Detection minimum Type A (30 mA AC) - Circuit Breaker 32 A (1 Phase) or 16 A (3 Phase) | |
Physical Properties
| Dimensions [W x H x D] (in mm) | 297 x 406 x 116 |
| Status Indication | LED based HMI |
|---|---|
| Enclosure Ratings | IK 10 (IEC 62262) IP 54 (IEC 60529) |
| Weight (depending on variant and charging cable length) | 5,6 kg … 7 kg |
| Operating Temperature | -30 °C … +50 °C |
| Max. Humidity | 95 % (non-condensing) |
| Max. Altitude | 4000 m a.m.s.l. |
| Mounting Method | On Wall |
| Dynamic Load Management | via AC Current Sensors (optional additional material needed) |