Package hamlib
Run-time library to control radio transceivers and receivers
Hamlib provides a standardized programming interface that applications
can use to send the appropriate commands to a radio.
Also included in the package is a simple radio control program 'rigctl',
which lets one control a radio transceiver or receiver, either from
command line interface or in a text-oriented interactive interface.
Version: 4.5.5
General Commands | |
| ampctl | control radio amplifiers |
| ampctld | TCP amplifier control daemon |
| rigctl | control radio transceivers and receivers |
| rigctlcom | COM port passthru as TS-2000 emulator to your rig |
| rigctld | TCP radio control daemon |
| rigmem | backup and restore memory of radio transceivers and receivers |
| rigsmtr | measure S-Meter vs azimuth using Hamlib |
| rigswr | measure VSWR vs frequency. |
| rotctl | control antenna rotators |
| rotctld | TCP rotator control daemon |
Miscellanea | |
| hamlib | radio and rotator control library |
| hamlib-primer | compiling and using the radio and rotator control library |
| hamlib-utilities | radio and rotator control utilities of Hamlib |