probe::ioblock.end.3stap - Man Page
Fires whenever a block I/O transfer is complete.
Synopsis
ioblock.end
Values
- devname
block device name
- ino
i-node number of the mapped file
error
0 on success
- rw
binary trace for read/write request
- opf
operations and flags
- hw_segments
number of segments after physical and DMA remapping hardware coalescing is performed
- phys_segments
number of segments in this bio after physical address coalescing is performed.
- idx
offset into the bio vector array
- bytes_done
number of bytes transferred
- sector
beginning sector for the entire bio
- vcnt
bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
- size
total size in bytes
- name
name of the probe point
- flags
see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out-out-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn't own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
Context
The process signals the transfer is done.
See Also0
tapset::ioblock(3stap)