Samsung Galaxy A15 Frame Removal

Insert a SIM card eject tool, bit, or a straightened paperclip into the hole on the SIM tray, located towards the top of the phone on the left edge.

Press in firmly to eject the tray and remove it.

Remove the fifteen 4 mm-long screws connecting the frame to the chassis.

Use the flat end of a spudger to pry up and disconnect the fingerprint button press connector from the motherboard.

Flip the phone over so the screen is facing up.

Insert an opening pick between the screen and the SIM card tray cutout to form a gap between the frame and the phone.

Slide the opening pick down the left edge of the device to unfasten the frame clips.

Continue sliding the opening pick around the perimeter of the phone until all of the clips are unfastened.

Pull the frame straight off of the phone.