Introduction

Use this guide if you need to replace the antenna in your Philips Somneo.

  1. owWeXOYJoHFpEaFk
    • Remove the four silicone feet on the bottom plate.

    • Remove the following Phillips screws from the bottom plate:

    • Two 9 mm screws

    • Two 13 mm screws

  2. j3sUwVyTNGBpA4Ve
    j3sUwVyTNGBpA4Ve
    kyDRWnbZDBgRUiDJ
    • Remove the bottom plate from the device.

  3. EMWj2dis3dYYHfyP
    EMWj2dis3dYYHfyP
    WAJJZBUZkxRQicG5
    • Disconnect the antenna connector by pulling it directly out of its port.

    • Remove the antenna.

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Evan Ferreira

Member since: 21/03/25

147 Reputation

0 comments