Oral-B iO Series 6 Body Replacement

Written By: Ethan Cobb
  • Comments: 0
Oral-B iO Series 6 Body Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. FVK52clAsmAPmXM5
    FVK52clAsmAPmXM5
    aEDRythgTVAmmNmy
    f2BPgZZ1Z5xxjToj

    • Carefully use an opening tool to pry the bottom cap loose.

    • You’ll notice a spring comes out too; be careful not to misplace it.

  2. ln2KdJGXIPpOLDLJ
    ln2KdJGXIPpOLDLJ
    Q2ZT2UrWePVHqPgf
    lWtCk3ibhvbw15Pc

    • Carefully detach the toothbrush head by pulling it off.

    • Attach the replacement head to the same spot where the original head was removed.

  3. bCxsFTyRHjB4STjW
    bCxsFTyRHjB4STjW
    kfPhBRw5lhoHQJTY

    • Carefully remove the metal casing that holds the head and body together.

  4. hilMyTgFV5NMUB6m
    hilMyTgFV5NMUB6m
    tFCusUOPrUkWBcYj
    vXJ4CxLlLsY6juqT

    • Carefully push the internal mechanisms out through the opening left by the removed bottom cap.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ethan Cobb

Member since: 19/03/25

459 Reputation

0 comments