Introduction
The outer bowl release button spring allows the Ninja Creami to lock and release the bowl securely during operation. If the button feels stuck, loose, or no longer pops back into place, the spring may be worn or displaced. This guide will show you how to safely inspect, remove, and replace the spring. Always unplug the device before starting to avoid injury.
Tools
-
-
Remove the thirteen 14.0 mm Phillips screws from the bottom platform.
-
Pry and remove the bottom platform
-
-
-
Remove the grey release button that holds the springs.
-
Remove the two springs located inside of the grey release button and replace them.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
