Lenovo IdeaPad Duet 3 Chromebook 11Q727 Speakers Replacement

Written By: Christian Reyes
  • Comments: 0
Lenovo IdeaPad Duet 3 Chromebook 11Q727 Speakers Replacement

Difficulty

Easy

Steps

6

Time Required

20 minutes

Introduction

If the audio from your Lenovo Ideapad Duet 3 Chromebook 11Q727 sounds muffled or distorted and cleaning the external speaker does not resolve the issue, then the speakers themselves may need to be replaced. This guide will detail how to disassemble the device, remove the speakers, and insert replacement speakers.

  1. j2NYrdKIV6TjgolY
    j2NYrdKIV6TjgolY
    wSwqrgDUBDmPW5UV

    • Remove any accessories such as the detachable keyboard from the device.

    • Power the device off by pressing and holding the power button for about three seconds.

  2. TH3K4HI6jWSlNUkr
    TH3K4HI6jWSlNUkr
    5VUwrEd6rApTYAqf

    • Insert a spudger into the ridge between the screen and the back of the device, creating a small gap.

    • Run the spudger along the edge of the screen and around the corners to separate the screen from the rest of the device.

    • Be careful not to use more force than necessary with the metal spudger or else the device could potentially be scratched.

    • Do not fully lift or pull the screen away from the device once it is loose because the internal connectors are still attached.

  3. RitMoAvMO21TnbZU
    RitMoAvMO21TnbZU
    uXZXtJRPZCBMyxQu
    346hdNpawt4cKqIr

    • Lift the small tab on the orange connector.

    • Separate the screen from the back of the device.

  4. Q6PSUXLOeEbqoKlk
    Q6PSUXLOeEbqoKlk
    65SRu455jMwtGyon

    • Remove four 3 mm screws using a Phillips #00 screwdriver.

  5. NaxOLZrSRFSK1UIy
    NaxOLZrSRFSK1UIy
    hARBy3P1Z33hWara

    • Disconnect the speaker by gently but firmly pulling the white connector directly from the device.

    • Remove the speaker.

    • Repeat for the left speaker.

    • The process is identical, except that on the left speaker, there are three 3 mm screws instead of four.

  6. 2fIKLhR2QGSO5Iy4

    • Repeat steps 4-7 for the left speaker, if needed.

    • The process is identical, except that on the left speaker, there are three 3mm screws as opposed to four.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Christian Reyes

Member since: 19/03/25

150 Reputation

0 comments