Introduction

This guide will show the steps needed to take out and replace the speakers in the Lenovo Chromebook 100e 2nd gen. The tools required for this guide are a Phillips head screwdriver and a plastic pick. something like this can be done at Home. its important to be careful during the guide. the speakers can be broken easily as they are fragile.

  1. gB5IPFqDRh1sOtp2
    • Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.

  2. yoGCFDWx2qPYUHAT
    yoGCFDWx2qPYUHAT
    bZBTyGCPji6OHZts
    • Open the laptop and lay it flat.

    • Go along the edge of the keyboard with an opening tool until it pops loose.

    • Potential for device damage: Make sure that the keyboard does not fall away from the laptop, as it is still connected to the internal components

  3. wS41n6yJY1hp4GcW
    wS41n6yJY1hp4GcW
    vEBiK2JuKBC2vMJm
    • Lift the keyboard connectors up using an opening pick.

    • Remove the connectors from their sockets.

  4. R6swSRBm4ddFHOTy
    • Using an opening pick, disconnect the speakers from the headphone jack.

  5. lQc1vhAsBZXgGiUq
    • Remove the two 2 mm Phillips #0 screws holding both of the speakers in.

  6. epHncLC5ZqyH2oDR
    • The speakers are now loose and can be removed from the laptop.

Conclusion

once you have completed in replacing your speakers carefully and easily. you must now reassemble your device. in order to do so, you must follow these instructions from the guide in reverse order, carefully and slowly.

Pup Washington

Member since: 14/01/21

582 Reputation

0 comments