Keurig K-Duo Pod Holder Replacement

Written By: AbelNegassi

Comments: 0

Difficulty

Very easy

Steps

Time Required

2 minutes

Introduction

The pod holder in the Keurig K-Duo is necessary to brew pod-style coffee. It can quickly become unusable if the needle inside is bent or the gasket is broken off. Replacing the pod holder is both inexpensive and simple to do.

Before you begin, ensure the machine is powered off and has cooled down if it was used recently.

Parts

Replacement Pod Holder

Step 1

Pull the silver handle upwards to open the compartment that holds the pod holder.

Step 2

Pinch the tabs while pulling the pod holder upwards and out of the machine.
Be wary of the needle above the pod holder!
If the pod holder is stuck, try pushing it back into the machine and pulling it out again.

Step 3

Align the replacement pod holder with the three slots in the machine
Make sure the tabs are aligned to prevent damaging the machine and/or the pod holder.