How to Remove a Blood Stain from Satin

Written By: Malak Elsayed Elghobashy

Comments: 0

Difficulty

Easy

Steps

Time Required

10 - 20 minutes

Introduction

Blood has a way of finding its way on just about any and everything, and your favourite satin pieces are no exception. Don't write off these items just yet, though! In this guide, we'll show you how to make blood stains vanish from satin with a few products you probably already have in your house.

They say to keep your head forward when a nosebleed strikes, and with this guide, you'll be able to do so confidently knowing that you have what it takes to conquer any stain that may follow!

Before you begin:

You may want to throw on some gloves and a mask to protect against disease if you're tackling blood stains made by someone else; especially more recent ones.
For extremely old stains, it's a good idea to soak the fabric for several hours before beginning procedure for better results.
Know that satin may be mistaken for its fabric relatives, such as silk. Be sure to refer to the information on your fabric's tags or packaging for confirmation, if available.

Tools

Step 1

Dip the stained fabric in bowl of cold water.
Massage the stain while submerged for about 20 seconds to ensure that it is fully saturated.

Step 2

Pour laundry detergent or dish soap into bowl.
Amount poured should equate to approximately 1/2 cup (120ml). Larger stains may require higher quantities.

Step 3

Wet a clean, dry cloth or sponge in the bowl.

Step 4

Dab the stain gently by repeatedly pressing the wet cloth or sponge against it.
Rubbing the stain may further spread it and/or embed it deeper in the fabric.

Step 5

Rinse the stain with cold water.
Inspect to determine whether further cleaning is required.

Step 6

Add a few drops of vinegar or hydrogen peroxide to the initial solution if the stain persists.
Repeat steps 3 and 4.
The combination of these chemicals creates peracetic acid. Do not mix hydrogen peroxide and vinegar.