HP Chromebook 15a-nb0013dx Lower Case Replacement

Written By: Sahid

Difficulty

Easy

Steps

Time Required

3 minutes

Introduction

If you have to remove your back plate for any reason, use this guide to disassemble your HP Chromebook 15a-nb001dx.

The back plate guards all your components in your laptop. It's the first thing to remove in order to replace any component.

When disassembling the HP Chromebook 15a-nb001dx make sure to power the device off.

For your safety, unplug all peripheries, discharge the battery below 25%, and power down your device before beginning disassembly.
Lay the device down so the lower case is facing up.

Use a Phillips screwdriver to remove four 6.6 mm screws that secure the lower case.

Insert an opening tool into the seam between the lower case and the chassis, near the hinge.
Pry around the entire perimeter of the lower case until it fully releases.
Remove the lower case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 19/02/25

957 Reputation