HP 14-dq5043cl Lower Case Replacement

Written By: Connor
  • Comments: 0
HP 14-dq5043cl Lower Case Replacement

Difficulty

Easy

Steps

3

Time Required

2 minutes

Introduction

Use this guide to replace the lower case on a HP 14-dq5043cl.

  1. YshBGVpMZlYJr6iH
    YshBGVpMZlYJr6iH
    A2wr4n3CuTCdScdG

    • For your safety, unplug all peripheries, discharge the battery below 25%, and power down your device before beginning disassembly.

    • Remove the two rubber feet on the lower case.

    • If you intend to reuse the rubber feet: Use a hairdryer or iOpener to lightly heat the feet to loosen the adhesive that secures them prior to removal. Take care not to stretch out the rubber.

  2. DPYHWHEByGrQmKor

    • Remove the six M2XL6 Phillips screws that secure the lower case.

  3. wJOsN2hAYLtOqXCo
    wJOsN2hAYLtOqXCo
    tXxJuK6of6gAn3BD
    NCcPaIRCERvbarwV

    • Insert a nylon spudger into the seam between the lower case and chassis.

    • Pry around the entire perimeter until the lower case fully releases.

    • Remove the lower case.

Conclusion

To reassemble your device, follow the above steps in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Author

Connor

Member since: 29/03/22

14761 Reputation

0 comments