Google Pixel 9a Rear Cameras Removal/Installation (Logic Board)

Written By: Spencer Day
  • Comments: 0
Google Pixel 9a Rear Cameras Removal/Installation (Logic Board)

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

This guide shows how to remove the rear cameras when replacing the logic board in your Google Pixel 9a smartphone.

  1. JZ1FUBNNFSw2LSCh
    JZ1FUBNNFSw2LSCh
    Skhx4pXgTQxfUgqH
    5KYHtNMADWywkIVc

    • Be careful not to smudge the camera lenses when removing and installing them. If you accidentally do, wipe them with a clean cloth.

    • Hold the logic board slightly above your work surface while working on the cameras—don't press the board against your work surface, or you may damage fragile components.

    • Use the flat end of a spudger to pry up and disconnect the ultrawide camera press connector.

    • Remove the ultrawide camera.

  2. 3SpL1mjDiCm5KRLa
    3SpL1mjDiCm5KRLa
    2RqQnkK4cGTxttye
    utHgAMMW3YYG46tG

    • Repeat the previous step to disconnect and remove the wide camera.

  3. NtP5LWFhynWZmHCc

    • Congratulations on completing disassembly! The remaining steps will show how to reassemble your phone.

    • You'll need to transfer the cameras to your replacement logic board.

    • Compare your replacement logic board to the original—you may need to transfer remaining components (such as the black and white coaxial cables) or remove adhesive backings from the new part before you install it.

  4. MdKjkJdxO6qpfTqa
    MdKjkJdxO6qpfTqa
    qIUlxA5G2ai1bra6
    TdJxBEYOqvPCMFxE

    • Put the wide camera into place on the logic board, being careful not to smudge the lens.

    • Align the press connector over its socket and press down with your fingertip—first on one side, then the other—until it clicks into place.

  5. lNESarhu1wQqFEPj
    lNESarhu1wQqFEPj
    OY16XkyPXXtpZCMd
    IOVRmyRuOAByWVk1

    • Repeat the previous step to install the ultrawide camera.

Author

Spencer Day

Member since: 14/09/22

117606 Reputation

0 comments