Google Pixel 9a Inner Housing Adhesive Application (All Repairs)

Written By: Spencer Day
  • Comments: 0
Google Pixel 9a Inner Housing Adhesive Application (All Repairs)

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

This guide shows how to apply the inner housing adhesive in your Google Pixel 9a smartphone. This guide is for all repairs besides the back cover repair.

  1. ecNEJPVyamPTYIMG
    ecNEJPVyamPTYIMG
    JETeRyYAFniyiwYQ

    • Use a spudger to scrape up and remove the six small pieces of adhesive around the rear cameras.

    • Use high‑concentration (>90%) isopropyl alcohol and a lint‑free cloth (or coffee filter) to clean up and remove any residue from the adhesives that were removed.

  2. Nxg6MgBrnQCD3GTO
    Nxg6MgBrnQCD3GTO
    SUHpXbjj1wrEx6Ml
    b66cLc2KCt1olvYf

    • Remove the larger, clear liner from the inner housing adhesive and lay it in place around the camera holes.

    • Use the cutouts for the small silver pads to help align the adhesive.

    • Use the flat end of a spudger to firmly push down on each piece of adhesive, securing them in place.

    • Remove the colored liner using the pull tab on the top edge.

    • If the adhesive starts to pull up with the liner, lay it back in place and use your spudger to secure it again.

  3. RCJCAhqx4hDdTIhh
    RCJCAhqx4hDdTIhh
    6fmeg3IjxdRFoT35
    v6VZ1sHfLDQuS4Cn

    • Use a spudger to firmly press down on each of the six pieces of inner housing adhesive to secure them.

    • These pieces of adhesive can easily be pulled up when removing the final liners, so make sure they're firmly in place.

Author

Spencer Day

Member since: 14/09/22

117606 Reputation

0 comments