Euhomy IM-06D Lid Replacement

Written By: devin wordell
  • Comments: 0
Euhomy IM-06D Lid Replacement

Difficulty

Easy

Steps

3

Time Required

5 - 10 minutes

Introduction

This guide is for the Euhomy IM-06D icemaker. This guides purpose is to replace the top cover of the ice maker. This part covers the ice that is made and holds the buttons for controlling the device. Symptoms of this piece needing to be replaced is if there is a crack or break anywhere on the piece. Please make sure to unplug the device before starting all guides.

  1. WsURODEOfeUcZPrL
    WsURODEOfeUcZPrL
    RFllK3OJtE1hChD3
    klAsFePDIlTX42B3

    • Open the lid.

    • Remove the two 5 mm Phillips screws that secure the lid.

    • Gently lift the lid off, with care not to damage or strain the attached cable.

  2. Wnt45hLkV6O3xFqV
    Wnt45hLkV6O3xFqV
    tZqYlKoJIi3QFYqR

    • Use a jimmy to pop off the white cover on the back of the lid.

  3. 6U2xAJlyOmkJGZUT
    6U2xAJlyOmkJGZUT
    Uv4syaVGRE3nL5Ci
    PYq4CrK2cCG56leU

    • Remove the two 5 mm Phillips screws that secure the display PCB.

    • Remove the lid.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

devin wordell

Member since: 21/03/25

174 Reputation

0 comments