Introduction
Ear cushions can wear out over time and start degrading. This guide will show how to replace the ear cushions of the device.
Tools
Parts
-
-
Remove the ear cushion using the plastic opening tool. Press the cushion inward and pry up.
-
Replace the ear cushion by pressing it down and on. It will latch into place like the original cover did.
-
To reassemble your device, follow these instructions in reverse order.
One comment
Honestly, not a very helpful guide. Putting the new ones on is a struggle. There are 10 retaining clips around the edge of the cup, which the new pad's base/ring will clip into. I found it helpful to use a tool (guitar pick, in my case) to work around the perimeter of the new pad and push it under each clip in turn, but it's a bit of a struggle. You can sort of peel back the pad itself to get a clear look at the base and the clips.