Introduction

  1. EbaTBQtaIeWOwpdR
    EbaTBQtaIeWOwpdR
    hLg3tYnwVcTO4sSG
    • remove the feet with a spudger

  2. nC2KXXjDhsfunSKI
    nC2KXXjDhsfunSKI
    dMdB2IodjA52KH6T
    • Remove the 11 screw with a PH0 screwdriver.

    • The screws are identical

  3. yXsI2OGTfbyLMUuR
    yXsI2OGTfbyLMUuR
    otgBrjCmMCfuWCtc
    • Insert a spudger between the bottom cover and the keyboard module, then go around the whole cover to uncip everything.

    • Remove the bottom cover from the computer.

  4. s2bTOnY2gW1ZSgHh
    • You now have acces to the inside of the machine.

  5. 2Ll1OmJ1mVOUOiDC
    • Remove the 3 screws that keep the battery in place, using a Phillips screwdriver.

  6. oIOSJHPtZQkcVJZJ
    • Disconnect the battery by gently lifting it.

    • Don't lift the battery too forcefully! It is held together by notches on the opposite side of the connector.

    • Pull the battery toward the top of the computer to dislodge it.

Conclusion

To put your device back together, follow the instructions in reverse order.

Léo FRAYSSE

Member since: 03/09/18

1283 Reputation

0 comments