Anker Soundcore Space One Battery Replacement

Written By: Malcolm Hewlett
  • Comments: 0
Anker Soundcore Space One Battery Replacement

Difficulty

Moderate

Steps

5

Time Required

20 - 30 minutes

Introduction

Are you experiencing frequent audio static or the power draining faster than usual? If so, use this guide to help fix the batteries in your Anker Soundcore Space One headphones.

An electric battery is a source of electric power consisting of one or more electrochemical cells with external connections for powering electrical devices. A failing battery can cause your headphones to have reduced usage time, inconsistent performance when using it, and a significant decrease in playtime.

Before using this guide, make sure to check out the troubleshooting page about audio distortion. Sometimes, other issues in the device can have similar side effects to a malfunctioning battery.

This guide requires soldering. If you're unfamiliar with soldering, review the How to Solder and Desolder Connections guide and take appropriate precautions before beginning.

  1. pqEIRh62JGpXLy52

    • Flip over the device so you can see the Soundcore symbol on the back two ear pieces.

  2. BNNqSZTeRRdmFHQp
    BNNqSZTeRRdmFHQp
    XMD3pyFITNmDLxeD

    • Take a strong spudger (metal or plastic) and carefully insert it into the lining between the two back ear pieces.

    • Using a metal spudger (like the one pictured) can cut you if not used correctly. Please be mindful of where you insert it if you choose to use one

    • Removing the cover can take a couple of minutes. However, don't be aggressive while removing it, as you could damage the interior components under the back earpiece

  3. 2AxJReQrwPekIpgh
    2AxJReQrwPekIpgh
    VSgoPeHhpPFJYTYV
    gCePSrPDeabn2QBC

    • Carefully remove the cover to reveal the battery.

    • Take a spudger and carefully lift the battery from the interior components.

    • Take care not to warp, bend, or puncture the battery.

    • The battery has a layer of adhesive under it. If necessary, use a hairdryer to lightly heat the battery to loosen the battery adhesive.

  4. oJJ5hcsrk1hSeJ6b

    • Lift out the battery.

  5. pP4BRonenyK2Egbx

    • Desolder the battery connections.

Conclusion

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Author

Malcolm Hewlett

Member since: 21/03/25

433 Reputation

0 comments