Flowermate Aura Teardown

Written By: TheDude
Published: 12/09/23
  • Comments: 0

Flowermate Aura Teardown

Published: 12/09/23

Teardown

Introduction

The Aura came in with a broken display. It costed about 100euro and was acquired in 2017. I tried working out how to open up the unit. But it went from repair job, to tear-down. I hope by posting this, someone else might have more success.

I'm happy this brand isn't too famous, because repair this is a pain the the derriere.

  1. iSCHtPZNN51ysfPc

    • It comes in a very nice box with some nice cleaning tools and extra screens.

  2. yCRpBCXZKsEpPZ4Y
    yCRpBCXZKsEpPZ4Y
    iPp3F3DNBEPtLoRG

    • The mouthpiece easily comes off. After that, you can get the herb canister out.

    • The bottom part can be pride open with a thin screw driver.

    • This is the part where the repair went to a teardown. I couldn't find which way the parts needed to come out next.

  3. JMSxGrAvqesyxZSt
    JMSxGrAvqesyxZSt
    MGiTbPa4DDIGMoqQ

    • I decided to put some paper in the oven, and push with screwdriver, towards the bottom part. Parts broke, but I'm not sure pushing the other way would've been better.

  4. kf3e1dWDO4bGEmeu
    kf3e1dWDO4bGEmeu
    NKij4NH6Y4Z1p5OQ
    4NTlOBNGPWhHbUMT

    • The external part of the oven could be removed from the top, but the wires are tight.

    • The PIC on the board is without any printing. The back of the PCB states "s214T-150119A"

    • Driving the oven are three 8205A 5A 20V MOSFET's

Author

TheDude

Member since: 10/01/23

435 Reputation

0 comments