Airvape Legacy Pro Quick Teardown

Written By: ShellingRook27
Published: 01/04/24
  • Comments: 4

Airvape Legacy Pro Quick Teardown

Published: 01/04/24

Teardown

Introduction

This teardown is just a quick look into the device. It was as far as I was willing to go without risking breaking it. Once I move on to a different model I will do a full teardown

  1. uaXoUQEepximnOBV

    • Remove the top cloth material with heat

    • The tape that holds the fabric is no longer sticky after removal. But I found that heating it up again and reapplying the fabric works!

    • Remove four Phillips head screws

    • Use a spudger to lift off the plastic panel

  2. yrNLWULTmmnPF3KY

    • Just another photo

  3. tK3ky6InThJgFwIm

    • The wireless charging coil sits on a sticky pad, can be easily lifted with tweasers

Author

ShellingRook27

Member since: 21/08/19

1915 Reputation

4 comments

Looking forward to seeing this continue!

andypapster -

nothing more with the teardown?

seedy53 -

I think on FC he mentioned this was still his primary device and until he replaces it, he won’t do a further tear down.

andypapster -

Yeah, that is all for now. Like Andy said I'm still using this device and will do a full destructive teardown when I replace it. I'll update the introduction with that information.

ShellingRook27 -