Introduction
-
-
Once the glass shards from the camera lens have been removed, thoroughly clean the camera bezel (the raised metal part around the camera).
-
-
-
Stick some double sided tape or two dots of glue on the new iPhone X rear camera cover.
-
Use tweezers to position the glass lens in its housing.
-
-
-
Lightly press down on the lens for a few seconds to stick it down correctly.
-
You can test your rear camera to make sure your photos and videos have the right definition.
-
Conclusion
Congratulations ! You have repaired your iPhone XS, the lens is replaced, clean it with a microfiber cloth. You can now take photos and film normally.
One comment
Can someone tell me where I should look for a replacement?
Took me almost an hour to gently break glass and clean area.
Do recommend heating the glass for easier removal.
All in all, 75 minutes for my first time. And replacement glass is a little smaller than original (bought somewhere online).
Adab Abu -
Where did u get the replacement part from?
Nathanael H. W. -