iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement

Written By: Walter Galan
  • Comments: 0
iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Prereq only for rear case.

  1. WNbLlZJIQtNiXZBP

    • Remove the following screws securing the audio controls and rocker switch to the rear case:

    • Two 2.0 mm Phillips #00 screws

    • One 2.5 mm Phillips #00 screw

  2. WMIsxyc5KEBvtW3L
    WMIsxyc5KEBvtW3L
    UYfP6WbZnXTywHWM
    o2dLPBqcIYyVAFpx

    • Grasp the audio control and rocker switch cable with a pair of tweezers.

    • Slowly peel the audio control and rocker switch cable up off the rear case.

    • Peel with care. The cable is secured to the rear case with mild adhesive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

699383 Reputation

0 comments