iPhone 6 Battery Connector

Written By: Sam Goldheart
  • Comments: 1
iPhone 6 Battery Connector

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Prereq: disconnect the battery

  1. H1HthQNPZmEFTcSq

    • Remove the following Phillips #00 screws from the battery connector bracket:

    • One 2.2 mm screw

    • One 3.2 mm screw

  2. 5JskONmSKsXFnkVY

    • Remove the metal battery connector bracket from the iPhone.

  3. piLRpAtGasEMTkk2

    • Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

    • Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Goldheart

Member since: 19/10/12

470007 Reputation

One comment

appreciated!!! :)

WillitSo -