iPhone 4S Upper Antenna Replacement

Written By: Walter Galan
  • Comments: 1
iPhone 4S Upper Antenna Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Internal prerequisite when front facing camera is removed.

  1. yP5Mw5GRJAZGfORA

    • Remove the 2.4 mm Phillips screw next to the headphone jack.

  2. K1pNQQ2vWBOPEUqv
    K1pNQQ2vWBOPEUqv
    PWAsEBeMmnlwFOLD

    • Use the edge of a plastic opening tool to peel the upper antenna off the headphone jack.

    • Use a pair of tweezers to remove the upper antenna from the iPhone.

    • Before reassembly, be sure to clean the metal-to-metal contact point on the upper antenna (not the mating halves of its connector) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

    Can the adhesive be reused?

    Sean - Lua Tech -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

699383 Reputation

0 comments