Xbox 360 Faceplate Replacement

Written By: Walter Galan
  • Comments: 1
Xbox 360 Faceplate Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

This guide is an internal guide used as a prereq.

  1. K34QYfxVrrftatym
    K34QYfxVrrftatym
    ytuwV2efqMfxRndW

    • Insert the flat edge of a spudger between the faceplate and the outer casing near the power button.

    • Run your spudger along the edge of the faceplate to release the clips securing it to the front of the console.

    • You may also accomplish this task by using the edge of the Xbox 360 opening tool, but it may scratch the plastic case.

    • Alternatively, you can use your hands to carefully pull the faceplate away from the Xbox.

    The faceplate just pulls off, using a tool is completely unneccessary. https://beta.support.xbox.com/help/xbox-...

    Erik Tomlinson -

  2. xM4CxhxJnIT4eHCA

    • Repeat the same motions as previously mentioned to release the left side of the faceplate.

  3. uqjqI2HkmxeYCGNH

    • Remove the faceplate from the front face of the console.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

699383 Reputation

0 comments