Volkswagen ID.3 2020 - 31.01.2022 Cabin Air Filter Replacement

Written By: Sebastian
  • Comments: 0
Volkswagen ID.3 2020 - 31.01.2022 Cabin Air Filter Replacement

Difficulty

Very easy

Steps

6

Time Required

1 - 2 minutes

Introduction

Maintaining the air quality inside your Volkswagen ID.3 is essential for a comfortable and healthy driving experience. One of the key components in ensuring clean air is the cabin air filter. Over time, this filter can become clogged with dust, pollen, and other pollutants, reducing its effectiveness. To keep your vehicle’s air fresh and clean, it’s recommended to replace the cabin air filter every 20,000 kilometers or once a year, ideally before springtime. This guide will walk you through the steps to replace the cabin air filter in your VW ID.3, ensuring you can breathe easy on every journey.

  1. yFrAmFHdUiNZUbop

    • Pull the hood release lever in the driverside footwell.

  2. IdNaESBVcQhNbQ4c

    • Raise the hood by simultaneously lifting up and pressing the hood latch release, located beneath the front edge of the hood, near the center.

  3. pZpFL5vkxArDmrXH
    pZpFL5vkxArDmrXH
    PesjV2vjiABfIbYw

    • Use one hand to hold the hood open temporarily while securing the hood with the prop rod:

    • Lift one end of the prop rod up or out to release it from the front area of the engine bay.

    • Swing the end of the prop rod up and slide it into the cutout on the underside of the hood.

    • Make sure the hood is well secured before you let go with your other hand, or it may fall and injure you.

  4. UVwgG3NToiSDsEIk
    UVwgG3NToiSDsEIk
    nWMFeUmBYo25j1qb

    • Locate the cabin air filter box inside the engine compartment.

  5. LYyeooysklvgLD6Z
    LYyeooysklvgLD6Z
    c6poHtI2dvpXIkPJ

    • Remove the cover by simultaneously pressing down on the release latch and pulling the cover left and out.

  6. ySdgYg43cPDXpHCs
    ySdgYg43cPDXpHCs
    YOyPIeyhnjoeUKHN

    • Remove the cabin air filter by pulling it out towards yourself.

    • When installing the new filter, it is important to install it the right way around, with the arrows on its side pointing downwards.

    • You might want to write the current date and mileage on the side of the new filter with a permanent marker. This makes it easier to keep track of replacement cycles.

Conclusion

To install the new filter, follow these instructions in reverse order.

Author

Sebastian

Member since: 19/08/18

27348 Reputation

0 comments