Introduction
This guide will help you replace the batteries of your Tribit X Sound Go speaker.
Note: There might be a swollen battery or battery acid, please use caution.
Tools
-
-
Insert a spudger in the seam between the front speaker grill and chassis.
-
Pry around the perimeter until the front grill releases.
-
Remove the front grill.
-
-
-
Remove the 14 Phillips screws around the perimeter of the speaker.
-
Lift off the speaker housing.
-
-
-
Disconnect the batteries by pulling the battery connectors directly out of their motherboard ports.
-
To reassemble your device, follow these instructions in reverse order.
4 comments
I couldn't find online the exact battery replacement, any suggestions?
fred -
Same here. What is the replacement battery number?
I am having difficulty finding a replacement battery with the same configuration as what is shown and in my device. I am going to try reaching out to the company’s customer service and see what they have to say.