Thrustmaster T3PA Cable Replacement

Written By: John.gmot
  • Comments: 0
Thrustmaster T3PA Cable Replacement

Difficulty

Moderate

Steps

3

Time Required

4 - 7 minutes

Introduction

  1. GFs1PPr2Jlsn5Oag
    GFs1PPr2Jlsn5Oag
    6RK1XJsLCx26CyUV
    gFQdi5Hb1WgiEFwU

    • Start by flipping it over, rest it on the pedals. make sure the wire is pointing towards the bottom. remove the 14 Screws on the back with a PH2 Phillips head screwdriver and carefully pop it off.

    • (DO NOT COMPLETELY PULL IT OFF BECAUSE OF WIRES.)

  2. r3t5WjfPNUCy2UFn
    r3t5WjfPNUCy2UFn
    ctKOvKwrYBRt3Z1M

    • Unplug the wire connected to the bottom (the one circled in the image).

  3. 46NFGrhsElBsBX54
    46NFGrhsElBsBX54
    pTabCYADmZECRNmN

    • Once the bottom is separated, remove the glue holding the wire and pull it out.

Conclusion

For reassembly, simply follow the steps in reverse.

Author

John.gmot

Member since: 31/05/23

270 Reputation

0 comments