Thrustmaster T248 Manual recalibration

Written By: Formica Fusca
  • Comments: 1
Thrustmaster T248 Manual recalibration

Difficulty

Very easy

Steps

6

Time Required

1 minute

Introduction

Guide on how to manually re-center the wheel. Helps when your physical wheel is not synced with in-game wheel and some other problems.

  1. CrkeTW4kpKfvpN6O

    • Open the Thrustmaster Control panel application and set the angle to 900°

    • Unplug and re-plug T248 to USB port.

    • Wait for auto-calibration to finish.

  3. rIa1FUoMHP4w3CMU

    • Keep turning the wheel until you reach a physical stop

  4. uETJe1pkZ2SxTKul

    • Keep turning the wheel until you reach a physical stop

  5. NjTtk1uhSK5ESclt

    • Perfectly center your wheel.

    • Keep in mind that rotation is set to 900°.

  6. OTBZalhnHS3hejes

    • Press and hold the buttons as shown on the picture. Wait for screen to say "SAVE" and release the buttons.

    • Xbox version of T248 uses same buttons, but the symbols on them are different.

Author

Formica Fusca

Member since: 01/08/24

2587 Reputation

One comment

Au top merci !

Anton S -