Thermomix TM31 Control Panel Replacement

Written By: Tymon Domanko
  • Comments: 0
Thermomix TM31 Control Panel Replacement

Difficulty

Moderate

Steps

6

Time Required

30 minutes

Introduction

This guide is to replace the control panel. To do this we will be Removing and Reinstalling all the plastic covers for the TM31.

  1. qxJTvnZUxWyYejyO
    qxJTvnZUxWyYejyO
    BfeU2FWHKZb1WNHN

    • Remove Contact Seal and Driving Pinion by pulling vertically or using Plastic Pry to lever out

  2. fnntoPgJwdMwubXY
    fnntoPgJwdMwubXY
    I2STKIRZ3v4r5KqZ
    FLIXiaSjopxRLi61

    • Use Cloth to protect knob from Scuffing and grab with Pliers. Pull straight out (this requires a bit of force)

  3. XQd1jwZW4OfKG4E1
    XQd1jwZW4OfKG4E1
    xxHcwYo3RvbiZwqb
    SWCHFhrGZ2C1NQ4G

    • Remove the 7 marked T20 Screws. This will leave the White Plastic Cover loose.

    • Lift off the White Plastic Cover

  4. bcyUT5rXvOnLFYcR
    bcyUT5rXvOnLFYcR
    DBJjmNQCMScReZAe

    • Carefully lift the control panel cover directly vertically off.

  5. YKnlTohE3ZZwNRc4
    YKnlTohE3ZZwNRc4
    xOrb1dkLXNxWSqLP

    • Move Button Rod Guide from old Control Panel Cover to new Control Panel Cover.

  6. TBIAwCMd4QhtJqrL

    • Reassemble by following these instructions in reverse

    • When Reassembling ensure this Camrod is rotated towards the front. The Cam at the top needs to be engaged properly to allow the lid to lock. Leaning the base towards the front when putting the White Plastic Cover on helps with this.

Author

Tymon Domanko

Member since: 22/09/24

133 Reputation

0 comments