TCA Quadrant Calibration

Written By: Formica Fusca
  • Comments: 0
TCA Quadrant Calibration

Difficulty

Very easy

Steps

6

Time Required

2 minutes

Introduction

How to re-calibrate the levers of the Quadrant, in case they are not aligned or not providing correct input in the Flight Simulator.

    • If you have your Quadrant plugged-in, then unplug it.

  2. KmRoXOuXLtN6F6LA
    KmRoXOuXLtN6F6LA
    2useWH4oidKXYBab

    • Mover each of the 3 levers to the lowest position.

  3. Ji4LyGiS31k3gTJd

    • Press and hold the button highlighted.

  4. bC5NZaaY3cbK2g1H

    • Connect your Quadrant to USB port while still holding the button.

    • Once connected, wait a few seconds and let go of the button

    • You can connect to:

    • USB port of your PC.

    • USB Port at the back of your TCA Yoke.

    • USB port of your Xbox.

    • Do not use USB Hubs or extension cables.

  5. BwafKTRaFLtLXBAD
    BwafKTRaFLtLXBAD
    4Z1DqdfuhIqc3351

    • Pull each levers to the highest position.

    • Move the levers smoothly for better calibration.

  6. kOy1t6YQNSWIVdDU

    • Press these 2 buttons at the same time.

    • This should save the calibration.

Author

Formica Fusca

Member since: 01/08/24

2587 Reputation

0 comments