Introduction

Use this guide to replace the lower case on your Microsoft Surface Laptop Studio.

  1. disBkJLYKsWyOnFC
    • Remove the rubber cosmetic strip along the outside edge of the back plate with tweezers.

    Is this strip tape or it metal? Is there replacements for it? I habe been trying to find it but I can only find tape as an alternative to this part.

    Luis Ruiz -

    It appears to be thin plastic with an aluminum coating on the outside. It's easy to remove by poking into the corner by the hinge with a set of tweezers-- the tweezers will pass right through.

    Michael Montalban -

    Ok and how do you reattach it when you're done? I mean is it glued on or how does that work?

    Rika -

  2. DymSIV2GPBF4IXwp
    DymSIV2GPBF4IXwp
    lkFYS5RPvf51M4NF
    • Remove the two rubber feet on the lower case with an opening tool.

  3. BQeCc2EHYUb4frIq
    • Remove the two screws with a T3 Torx screwdriver.

  4. c3A3HPFhTiu26TnT
    • Remove the seven screws securing the lower case with a T3 Torx screwdriver.

  5. kRIiVor6o5EqdNoD
    kRIiVor6o5EqdNoD
    diJVsnGVIsMcPrlE
    • Lift the lower case gently and set it above the device.

    • Take care not to strain the battery cable as you move the lower case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Connor

Member since: 29/03/22

10611 Reputation

0 comments