Sublue WhiteShark Mix Underwater Scooter Safety Switch Replacement

Written By: Benjamin J Farland
  • Comments: 0
Sublue WhiteShark Mix Underwater Scooter Safety Switch Replacement

Difficulty

Moderate

Steps

10

Time Required

30 minutes

Introduction

This guide will show you hot to replate the safety switch on the Sublue WhiteShark Mix Underwater Scooter.

  1. hWbKOQbDDG6lAbQR

    • Remove the black screw by rotating it counterclockwise.

  2. ffbrZuMbgCRFZifE

    • Hold the device in place and pull up on the floater.

  3. kcUfhRi26l2SlfIH

    • Remove the top floater.

  4. T3iMtnuPtqpYDSXx

    • Turn the device upside-down.

  5. JjJnH4djhLGEmILy

    • Press the push button in while sliding the planner towards the back of the device to remove the battery panel.

  6. lwBRGsyCfQlHUB1A

    • A push tab holds the battery in.

  7. ncKIGgLJ2AW55Dn1

    • Push the tab in and pull the battery outward to remove it.

  8. aNdtSFMyYvAWGdDK

    • Remove the ten Phillips screws on the bottom of the device. Remove the bottom panel.

  9. tisKUPZc4G2OCYNI

    • Pull the panel forward.

    • You may need to use pry tools to aid in separating the panels.

  10. 4baDEpNawdLyicSB

    • Place the main body panel with the handle that holds the safety switch towards you. Pull the white tab of the right and pull towards you from the top of the safety switch.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Benjamin J Farland

Member since: 30/10/23

271 Reputation

0 comments