SteelSeries Rival 3 Bottom Skates Replacement

Written By: hellonearth311
  • Comments: 0
SteelSeries Rival 3 Bottom Skates Replacement

Difficulty

Easy

Steps

1

Time Required

1 - 5 minutes

Introduction

Replace torn or worn-out mouse skates on your SteelSeries Rival 3.

  1. 4D2csPXQl1pruRuZ
    4D2csPXQl1pruRuZ
    rUP3EaKBm6C3HGLm
    iZfL5yCoYDauYPsu

    • Use a metal spudger to carefully loosen the adhesive underneath the mouse skates.

    • The metal spudger might slip, and hurt your hand. Be careful not to push too hard, and instead do a side-to-side motion.

Conclusion

Make sure to peel off the adhesive backing on your new mouse skates before applying them.

Author

hellonearth311

Member since: 30/03/24

390 Reputation

0 comments