Steam Deck OLED Battery Reconnection

Written By: Clay Eickemeyer
  • Comments: 3
Steam Deck OLED Battery Reconnection

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

This guide demonstrates how to reconnect the battery in your Steam Deck OLED during reassembly.

  1. oEXZCmlHUOI4YTQa
    oEXZCmlHUOI4YTQa
    kPIGgEUKARRvvAHX
    xHNKtaUswWNMYUsU

    • During reassembly, use the flat end of a spudger to slide the battery connector into its socket on the motherboard.

    This step should come after the SSD is installed.

    Khurram Tariq -

    Step 12 is out of order here since this guide refers to replacing the SSD. Reconnecting the battery before swapping out the SSD is all kinds of bad!

    Edit: This step should be the very last step. Step 16

    Amer -

    To address these concerns: this step (when read in the SSD replacement guide) is labelled as a reassembly action, which is to be followed as the guide is read in reverse order during reassembly.

    Clay Eickemeyer -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Clay Eickemeyer

Member since: 19/09/22

77552 Reputation

0 comments