Introduction
This guide will show the user how to remove the W810i Logic Board
-
-
Make sure the phone is off and press down firmly against the Cingular icon with your thumb
-
Slide the panel down and remove latch
-
-
-
Flip the phone over and pry off the front (keypad side) faceplate with multiple blue hand-wedges
-
Separate keypad from logic board by turning it upside down and allowing it to fall off
-
-
-
Remove the two remaining screws in the top corners of the phone using a T-6 screwdriver head
-
Remove the logic board with multiple blue hand-wedges, be careful not to snap the logic board in half, along with snapping the wiring from the logic board
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
