Introduction

This guide will show the user how to remove the keypad

  1. ZtAb15lxBtHiY2IR
    • Make sure phone is off, and press down firmly against the Cingular icon with your thumb

    • Slide the panel down and remove latch

  2. a1jF3KvJRPrftxp3
    a1jF3KvJRPrftxp3
    sqVhBQKbyJ3NGDjw
    • Lift and Pull battery out

    • Remove the SIM card too if you have one

  3. jdXItrSPkenkQHaw
    • Remove the two outer screws using a T-7 head for a screwdriver

  4. dUpgEKdV2veGwXrP
    • Remove the two smaller inner screws with the Mini-Phillips screwdriver head

  5. qC5SrfLjrFQ6sgW3
    qC5SrfLjrFQ6sgW3
    BkrTNFGTlqmbtgFE
    • Remove the Back (camera side) Faceplate with the blue hand-wedge

  6. rBsODYi25oDNRuwV
    rBsODYi25oDNRuwV
    LeqImqiMAoErdl6J
    QcXR35KpFj6DL2s2
    • Flip phone over and pry off the Front (Keypad side) Faceplate with multiple blue hand-wedges

    • Separate keypad from logic board by turning it upside down and allowing it to fall off

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ben Micucci

Member since: 14/10/11

186 Reputation

0 comments