Smart Soldering Iron Power Source Connection

Written By: Carsten Frauenheim

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Prerequisite-only guide for connecting a Smart Soldering Iron to a power source.

The Smart Soldering Iron works best when paired with a Portable Power Station, which allows fine control of the soldering iron's temperature and other settings.
For detailed setup instructions for the Portable Power Station, check out this guide.
However, it also works just fine with any power source capable of delivering at least 20W via USB-C PD.
Connect the end of the USB-C cable without the blue locking collar to a compatible USB-C power source.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 10/03/20

130781 Reputation