Siemens Surpresso - Bosch Benvenuto remove left side panel

Written By: VauWeh
  • Comments: 0
Siemens Surpresso - Bosch Benvenuto remove left side panel

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

Basic instructions: Removing the left side panel on the Siemens Surpresso - Bosch Benvenuto

These instructions may also help with other Siemens/Bosch models and with coffee makers from Nivona, Melitta, and Miele—they have a very similar design.

  1. kboIKYxdomU25eBb
    kboIKYxdomU25eBb
    TJyYQrVwrVZ3OYmF

    • The side panel is attached to the front edge with three bayonets. It must therefore be lifted out upward.

    • Grasp the side panel firmly at the rear edge and pull it backward and upward at the same time. It should come off quite easily.

    • When reassembling, make sure that the bayonets on the front edge engage properly.

Conclusion

Follow the steps in reverse order to reassemble your device

Author

VauWeh

Member since: 19/10/15

234462 Reputation

0 comments