Siemens Surpresso - Bosch Benvenuto back panel removal

Written By: VauWeh
  • Comments: 0
Siemens Surpresso - Bosch Benvenuto back panel removal

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

Basic instructions: remove the back panel on the Siemens Surpresso - Bosch Benvenuto

These instructions may also help with other Siemens/Bosch models and with coffee makers from Nivona, Melitta, and Miele—they have a very similar design.

  1. cOUklpFp6AmA11p3
    cOUklpFp6AmA11p3
    XuCAWGZ2tDPAIqJd

    • Remove the seven Torx T10 screws on the rear panel.

    • Do not remove the back panel completely yet, the power switch is still connected.

    • Lift the back panel away.

    • Remove the two flat plugs from the inside of the power switch.

Conclusion

Follow the steps in reverse order to reassemble your device

Author

VauWeh

Member since: 19/10/15

234462 Reputation

0 comments