Sansa e260R Rear Case Replacement

Written By: Casey Smith
  • Comments: 0
Sansa e260R Rear Case Replacement

Difficulty

Moderate

Steps

3

Time Required

5 - 10 minutes

Introduction

  1. jQTrRMSEiGTyuUQI

    • Before disassembling the device, make sure it is powered off.

    • Remove the four 1.5mm screws on the back of the device.

  2. UekhGwVfJJyCN3n6

    • Using a plastic opening tool, lift the metal backing from the front of the device.

  3. sFraBpfZdN6WtrYu

    • Pull the rear panel off of the Sansa e260R.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Casey Smith

Member since: 21/01/12

111 Reputation

0 comments