Samsung U28E510 Jog Button Replacement

Written By: Jake Ritter
  • Comments: 5
Samsung U28E510 Jog Button Replacement

Difficulty

Easy

Steps

3

Time Required

15 minutes

Introduction

This guide will assist users to replace a damaged or nonoperational jog button.

  1. FIs1xPIkbIPPZAKd
    FIs1xPIkbIPPZAKd
    nbsrAdNfoRnbYUiV
    ZFAkZ2QxmOeQNiNx

    • Start by removing the screen bezel.

    • Use a pair of spudgers to pry between the bezel and the rest of the monitor.

    • Ideally use plastic tools as this step could damage the edges of the screencover.

    • lay monitor on its back and pull off screen cover.

  2. BXCRUrYkIkmf6iBW
    BXCRUrYkIkmf6iBW
    3flefTdemnLYcPMT

    • Flip the monitor over so that it is facedown.

    • remove the single screw in the middle using a #2 Phillips screwdriver.

    • Remove the backing to reveal the Jog Button.

  3. kHZrHEw52Ntt1WlO

    • Disconnect signal cable to power supply board.

    • Remove and replace jog button.

Conclusion

To reassemble your device, follow these instructions in reverse order. Ensure the bezel completely snaps in place all around monitor.

Author

Jake Ritter

Member since: 23/01/18

106 Reputation

5 comments

i have a samsung u28d590d and it works just the same. simple and easy as the guide says.

joshsc2 -

Does anyone have the part number or where I can buy the new jog button?

Kyle Gulliford -

“bn96-32135b “

Gary Deon -

this is the part number i found BN96-32135B

Gary Deon -

the button on my monitor wasn't working anymore - pressing it didn't do anything. So I decided to follow this great guide. When I removed the top of the button and put it on again, I noticed that it worked again. Seems that there had been just to many dust.

Thanx for this guide!

Ralf D. Müller -