Samsung Galaxy J7 Screen Assembly Replacement

Written By: Gabriel Arellano
  • Comments: 1
Samsung Galaxy J7 Screen Assembly Replacement

Difficulty

Moderate

Steps

7

Time Required

35 - 45 minutes

Introduction

This guide is for anyone dealing with a cracked or unresponsive screen on their Samsung Galaxy J7 (2015). A damaged screen can impact the usability and functionality of your device, and this replacement will restore it to full working condition. The repair requires no advanced technical skills but involves handling delicate components, so follow each step carefully.

For the best results, make sure the device is powered off and please work in a clean, static-free environment

  1. Kbe6xYKIosxh4KEY
    Kbe6xYKIosxh4KEY
    G3UyHOgnKTldDysd

    • Locate the Tab: Find the tab at the top left corner of the back cover. (highlighted by red square)

    • Insert the tool: Use a fingernail or a plastic opening tool to lift the tab gently

    • Pry open the cover: Carefully work around the edges to remove the back cover completely

    • Tip: If cover is stuck do not force it open use a plastic opening tool to avoid scratching

  2. AVw5XROgUkVB5FmI
    AVw5XROgUkVB5FmI
    XVMjCQHxhrut2jYw

    • Locate the Battery slot: Find the small slit at the bottom right corner of the battery (highlighted by red square)

    • Remove Battery: Gently pop out the edge and carefully pull out the battery.

    • Tip: Ensure the battery is disconnected from the motherboard before removing it.

  3. VI2TQsh5aUxKBajV

    • Using the Phillips #000 screwdriver, remove the ten 4.2 mm screws around the edge of the midframe.

  4. PMd14C2nc5QsRmij
    PMd14C2nc5QsRmij
    m233EknFPpKanVHU
    ZlkVNHvWC1MGdDeK

    • Lift up the back of the device with the iFixit opening tool and disconnect it from the front.

    • If the back panel is difficult to remove, gently heat the edges using a hair dryer or heat gun to soften the adhesive.

  5. GmaZBtJcZPkNxGio
    GmaZBtJcZPkNxGio
    nVEVL2XGSWdGaVPa

    • The speaker piece is lightly adhered. Use a plastic pry tool to gently lift it up and disconnect the cable.

  6. iTuZ6qEvlPa11THw
    iTuZ6qEvlPa11THw
    x4fqgWAnydWOLDvD

    • Gently lift up the tab of the motor.

    • Remove the motor from the panel completely to disconnect it.

    • Removing the motor allows easier access to the screen assembly for replacement. Handle the motor and its connectors with care.

  7. e6NFJXjUJUbhpYRt

    • Reverse these steps with your new phone screen to replace it.

    • After reassembly, test the new screen for touch responsiveness and display quality before fully securing the device

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Gabriel Arellano

Member since: 05/02/19

465 Reputation

One comment

I replaced the broken screen....before I saw this. Now my phone will not turn on. what should I do? ruth.fnp@gmail.com

Ruth Thomas -