Samsung Galaxy Book Pro 360 15" Rubber Feet Replacement

Written By: Spencer Day
  • Comments: 0
Samsung Galaxy Book Pro 360 15" Rubber Feet Replacement

Difficulty

Easy

Steps

2

Time Required

5 - 10 minutes

Introduction

Use this guide to replace the rubber feet in your Galaxy Book Pro 360 15" laptop.

  1. gUKju23eSfPWoTQG
    gUKju23eSfPWoTQG
    fHkm3bbNXXTcaKQo

    • Before you begin, shut down your laptop and unplug it.

    • Close the screen and lay your laptop down with the rear case facing up to access the four rubber feet.

  2. AjKnV44Yyj2yotFw
    AjKnV44Yyj2yotFw
    oFrIGNcPOxuqMBwH
    4WpNenWhEvrI2KVA

    • Insert an opening pick between the rear case and the rubber foot.

    • Pry up with the pick and dislodge the foot from the rear case.

    • Use tweezers or your fingers to remove the rubber foot.

    • Repeat this process on the remaining rubber feet.

    • There are two types of rubber feet for this laptop. During reassembly, make sure the top feet say "M4" and the bottom feet say "M1".

    • To reinstall a rubber foot, align it over the recess and push down until it's secured.

Conclusion

To reassemble your device, follow the instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

Author

Spencer Day

Member since: 14/09/22

88286 Reputation

0 comments